Specialities – Estremo

Fully Synthetic ATF MV Lite

calstudio-admin — Fri, 04 Aug 2023 02:27:49 +0000

Features

Advantages

Technical Specifications


Colour	Red
Kinematic Viscosity mm²/s @ 40°C	47.3
Kinematic Viscosity mm²/s @100°C	7.0
Viscosity Index	105
Pour Point, °C	-25

The information and recommendations contained herein are based on tests and data believed to be reliable and are issued for your guidance. However, we cannot accept any responsibility for the results as the use and application of the product are beyond our control.

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

The information and these recommendations are based on the data of which we are aware and is believed to be correct as of the date hereof. Information and recommendations are supplied upon the conditions that the recipients will make their own decision as to the safety and suitability for their purposes. No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose, or any other nature, are made with respect to the product or the information and recommendations. Estremo makes no representation as to the completeness or accuracy. In no event will Estremo be responsible for damages of any nature whatsoever, resulting from the use or reliance upon the information and recommendations.

Nano Throttle Body Cleaner

calstudio-admin — Tue, 30 May 2023 03:25:57 +0000

Application

With ignition off, remove air filter and spray inside of throttle body to remove deposits on throttle plate and other parts.
Start the engine and run at medium idle ( about 750 rpm ) and spray the balance of the can inside the throttle body, automatic choke plate, main throttle plate and shaft. ( It is normal for rpm to reduce to 350-400 rpm).
When can is empty, turn off the engine and wait for 5 minutes.
Restart engine, open and close throttle rapidly, within normal limits, for 2 minutes.
Replace air filter.

Notes

Flammable aerosol. Contents under pressure. Use in well ventilated areas. Keep away from heat and flames. Possible eye irritation. If eye contact occurs, flush eyes immediately with water. Ingestion – do not induce vomiting. Call physician immediately. Store in a cool and dry place.

KEEP OUT OF REACH OF CHILDREN

NOT HARMFUL TO CATALYTIC CONVERTER AND OXYGEN SENSOR. IF SPILLED OR SPRAYED ON PAINTED SURFACE, WIPE DRY OR WASH WITH WATER IMMEDIATELY

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

Nano Windscreen Cleaner

calstudio-admin — Tue, 30 May 2023 03:24:30 +0000

Advantages

Application

Pour 1 bottle on Nano Windscreen Cleaner into your vehicle wiper tank

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

Synthetic Brake Fluid

calstudio-admin — Tue, 30 May 2023 03:21:56 +0000

Features

Application

It is highly recommended for use in modern, high performance, automotive disc and drum brakes, including ABS systems, and clutch systems in passenger cars and commercial vehicles where a DOT 4 type brake fluid is recommended.

It is highly recommended to flush your brake fluid every six months to avoid breakdown and vapour lock.

Technical Specifications


Kinematic Viscosity mm²/s @ 40°C	1300
Kinematic Viscosity mm²/s @100°C	2.2
FMVSS Grade	Dot 4
Equilibrium Reflux Boiling Point, °C	255
pH	8.5
Wet Equilibrium Reflux Boiling Point, °C	160

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

What Is Brake Oil?

Brake fluid is a special liquid that lives in your car’s braking system. Think of it like a messenger. When your foot presses down on the brake pedal, the brake fluid carries that pressure to the brakes on each wheel. It converts the force of your foot into hydraulic pressure, which presses the brake pads against the wheels and slows the car.

This fluid works because fluids are incompressible. This means that when you apply pressure to it, the pressure travels from one end of the system to the other immediately. This gives your brakes a quick, strong response every time you stop.

Why Does Brake Oil Need to Be So Special?

No other fluid can do this job. Your car’s braking system gets very hot, especially when you brake hard or drive down long hills. If brake fluid boils inside the brake lines, it turns into steam. The steam can condense, meaning your brakes become soft and sluggish. This is dangerous.

Good quality brake oil has a high boiling point so it stays fluid even in extreme heat. Estremo International’s brake fluid formulations use advanced technology to keep your braking system strong and responsive, even in the most difficult driving conditions.

Types of Car Brake Fluid

Car brake fluid comes in different grades, known as DOT ratings. The most common are DOT 3, DOT 4, DOT 5 and DOT 5.1. Each grade has a different boiling point and a different chemical base.

DOT 3, DOT 4, and DOT 5.1 are glycol-based fluids. Over time, they absorb a small amount of moisture from the air, which helps protect the metal parts inside the braking system from rusting. DOT 5 is silicone-based and does not absorb moisture. Each type is suited to different vehicles and driving needs, so it’s important to check your car’s manual before choosing.

Always use the type of brake fluid recommended by your car manufacturer. Mixing different DOT grades is not safe and can reduce braking performance. If you ever switch from one type to another, always flush the entire braking system first.

Signs Your Brake Oil Needs Changing

Brake fluid doesn’t stay fresh forever. Over time, it absorbs moisture from the air, which lowers its boiling point and impairs its performance. Here are some clear signs that your car’s brake fluid needs attention:

Your brake pedal feels soft or spongy when you press it. This means there may be too much moisture or air in the fluid system. You may see the ABS warning light come on in your dashboard. You may hear unusual noises when you apply the brakes. You may smell something burning near your wheels after stopping. The fluid in the reservoir appears very dark or cloudy instead of clear or light yellow.

If you notice any of these signs, visit a trusted mechanic and have your brake fluid checked immediately.

When Should You Change Your Brake Fluid?

Most experts recommend changing your car’s brake fluid every one to two years, or every 20,000 to 45,000 kilometers, depending on your vehicle and how often you drive. Some car brands have their own specific service intervals, so always follow your owner’s manual guidelines. Even if there are no warning signs, old brake fluid can still quietly lose its strength. Changing it on a regular schedule keeps your braking system operating at peak performance and protects all the metal and rubber parts inside.

Why Choose Estremo International Brake Oil?

At Estremo International, we have been engineering advanced automotive lubricants and fluids since 2010. Our name comes from the Italian word “estremo,” which means extreme, because we push the limits of performance in everything we make. Our brake oil products undergo rigorous research and development processes to meet the highest quality standards.

We use cutting-edge formulation technology to give your car’s braking system maximum heat resistance, long service life, and full compatibility with modern ABS and hydraulic systems. Whether you drive a small city car or a high-performance vehicle, Estremo brake fluid gives you the confidence to stop safely every time.

Our entire product range, including synthetic, semi-synthetic, and specialty fluids, reflects our commitment to cleaner, more efficient, and more reliable automotive care. When safety is most important, Estremo International delivers.

FAQs: People Also Ask

Q1. What is the difference between brake oil and brake fluid?

Brake oil and brake fluid are two names for the same thing. Both refer to the hydraulic fluid used in a car’s braking system that transfers force from the pedal to the wheels.

Q2. Can I top up my brake fluid myself at home?

Yes, you can top up your brake fluid reservoir at home if the level is low. However, always use the correct DOT grade specified in your car’s manual. If the level continues to drop, visit a mechanic, as it could indicate a leak in the system.

Q3. What happens if I use the wrong type of brake fluid?

Using the wrong type of brake fluid can reduce your braking performance, damage rubber seals, and even cause brake failure. Always match the fluid type to your car manufacturer’s recommendation.

Q4. How do I know if my brake fluid has too much moisture?

You can use a simple brake fluid test strip or electronic tester to check the moisture level. Dark or discolored fluid in the reservoir is also a sign that the fluid needs to be changed.

Q5. Does Estremo International offer brake fluid for all types of vehicles?

Yes. Estremo International manufactures a wide range of automotive fluids designed for cars, motorcycles and light commercial vehicles in the ASEAN market. Our products meet international quality and safety standards to give every vehicle the best performance.

Fully Synthetic Multi CVT Fluid

calstudio-admin — Tue, 30 May 2023 03:15:37 +0000

Advantages

Applications

Highly recommended for use in push belt type CVTs:

Toyota CVTF TC, FE
Nissan NS1, NS2, NS3
Honda HMMF¹, HCF2
Mitsubishi SP-III, CVTF-J1
Subaru ECVT, iCVT
Daihatsu AMMIX CVT
Suzuki CVTF TC, NS-2, CVT GREEN 1
Hyundai SP-III
Chrysler Jeep NS-2
Mini Cooper EZL 799
JASO M315 A Specification

Not recommended for use in:

Chain type CVTs – eg: Audi Multitronic and Subaru Lineartronic
Power Split type CVT – eg: Toyota Prius
Honda starting clutch CVT

Technical Specifications


Colour	Red
Kinematic Viscosity mm²/s @ 40°C	35.7
Kinematic Viscosity mm²/s @100°C	7.4
Viscosity Index	180
Pour Point, °C	-52
Calcium Mass %	0.020
Phosporus Mass %	0.049
Specific Gravity @ 60°C	0.849

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

Fully Synthetic ATF MV

calstudio-admin — Tue, 30 May 2023 03:11:42 +0000

Features

Advantages

Applications

GM DEXTON IIIG/H, Ford MERCON, ALLISON C-4. Hyundai, KIA, Subaru and Mazda. European OEM’s like ZF TE-ML-14A, Voith 55.6335, MAN 339 Type Z-1 and MB, VW and BMW 4 and 5 speed automatic

Technical Specifications


Colour	Red
Kinematic Viscosity mm²/s @ 40°C	35.8
Kinematic Viscosity mm²/s @100°C	7.8
Viscosity Index	197
Pour Point, °C	-54

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

Fully Synthetic ATF LV

calstudio-admin — Tue, 30 May 2023 03:08:58 +0000

Features

Advantages

Applications

JASO M315 1A / 1A-LV**Honda DW-1**Toyota Type WS**Aisin Warner JWS 3324**Hyundai-Kia NWS-9638 T-5 / SP-IV / SP-IV-RR / SPH-IV**GM Dexron VI**Ford Mercon LV / Mercon SP**MB 236.12/14/41**Bentley : P/N PY112995PA**Audi/Volkswagen : G 052 533, G 055 005(-A, A2)/G 055 540 (A2)**DSI : H 6-Speed Transmissions**Chrysler/Dodge/Jeep : P/N 05127382AA, 68043742AA**Ford : P/N XT-10-QLV, XT-6-QSP or –DSP**GM : P/N 88863400, 88863401, 12378515**Hyundai-Kia : P/N 040000C90SG**Jaguar-Land Rover : P/N TYK500050**Maserati : P/N 231603**Porsche : P/N 000 043 304 00**Saab : P/N 93 165 147**BMW/Mini : P/N 83 22 0 142 516/83 22 0 397 114/83 22 2 163 514/83 22 2 289 720/83 22 2 305 397

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

Power Steering Fluid

calstudio-admin — Tue, 30 May 2023 03:05:27 +0000

Features

Advantages

Application

It is highly recommended to change power steering oil for every 50,000km or one year of service.

Technical Specifications


Colour	Yellowish Clear
Kinematic Viscosity mm²/s @ 40°C	35
Kinematic Viscosity mm²/s @100°C	7.1
Viscosity Index	155
Pour Point, °C	-20

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885

Antifreeze Supercoolant

calstudio-admin — Tue, 30 May 2023 03:00:38 +0000

Features

Technical Specifications


Coolant Concentration Level	100%
Specific gravity @ 20°C kg/m³	1.132
Boiling Point °C ASTM D1130	190
pH value ASTM 1787	7.5
Reserve Alkalinity, ASTM D1121	20 min

All laws and regulations should be observed when disposing of Antifreeze/ Coolant and Radiator Fluids. Call the EPA or the office of your state or local environmental agency for details on disposal procedures.

Why Estremo?

The Best Lubricant Of Choice

Performance

Superb Quality

Satisfaction Guaranteed

Typical Characteristics

Name	Units	Test Method	Result
Kinematic Viscosity, 100°C	mm2/s	ASTM D445	18.5
Kinematic Viscosity, 40°C	mm2/s	ASTM D445	171
Viscosity Index	–	ASTM D2270	124
Pour Point	0°C	ASTM D97	-27
Flash Point, PMCC	0°C	ASTM D93	238
Density at 15°C	g/ml	ASTM D4052	885